Espressif Systems /ESP32-P4 /H264_DMA /IN_CONF0_CH4

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as IN_CONF0_CH4

Description

RX CH4 config0 register

Fields

INDSCR_BURST_EN_CH4	Set this bit to 1 to enable INCR burst transfer for Rx transmitting link descriptor when accessing SRAM.
IN_ECC_AES_EN_CH4	When access address space is ecc/aes area, this bit should be set to 1. In this case, the start address of square should be 16-bit aligned. The width of square multiply byte number of one pixel should be 16-bit aligned.
IN_CHECK_OWNER_CH4	Set this bit to enable checking the owner attribute of the link descriptor.
IN_MEM_BURST_LENGTH_CH4	Block size of Rx channel 1. 0: single 1: 16 bytes 2: 32 bytes 3: 64 bytes 4: 128 bytes
IN_PAGE_BOUND_EN_CH4	Set this bit to 1 to make sure AXI write data don’t cross the address boundary which define by mem_burst_length
IN_RST_CH4	Write 1 then write 0 to this bit to reset Rx channel
IN_CMD_DISABLE_CH4	Write 1 before reset and write 0 after reset
IN_ARB_WEIGHT_OPT_DIS_CH4	Set this bit to 1 to disable arbiter optimum weight function.

Links

() ()